Mold appears in almost every home, especially during and after the monsoon season. Surprisingly, it affects modern homes more frequently than older ones. That’s because mold thrives in high-humidity environments, and modern house construction’s stronger seals around windows and doors trap in more moisture than older homes with drafty windows and doors.
Mold on the walls of your building is very aggravating and something that deteriorates the condition of the building. The problem requires action as soon as you become aware of it. It not only stinks and looks bad, but it may also harm your health and cause damage to your property.
If you want to get rid of it, let’s first begin with understanding the difference between mold and mildew.
Mold growth signs
Mold may develop on an interior wall in any location. However, it’s more likely to be seen near the ceiling or floor, or at the baseboard trim’s borders. It’s most frequent in bathrooms, but it may also happen in kitchens, laundry rooms, basements, and other places with poor ventilation and where the leakage is more prevalent. For a more professional approach, you need to opt for expert professionals such as
Mold testing Toronto
Finding green, brown, orange, or even black patches is the most evident indicator of a mold problem. However, there are additional, less obvious signs:
- Paint that is cracked or peeling
- “Soot” or black streaks, flecks, or spots that appear regularly
- Having a musty, and wet odor.
If you see mold on the inside of your home’s walls, even if it’s just a little area, you should act quickly. If you don’t get rid of the mold right away, it will spread and become detrimental to your home and its aesthetic looks.
Mold exposure has been linked to allergic responses and poor health according to studies. Symptoms such as a runny nose, inflamed eyes, and breathing problems are possible. As a result, it’s critical to act as soon as you discover any mold symptoms
Tea Tree Oil
Tea tree essential oil contains antifungal and antibacterial qualities, making it an excellent mold removal remedy. To begin, fill a spray bottle with one teaspoon of tea tree oil and two glasses of water. Spray the solution over the spot where the mold has begun to appear and wipe it away with a clean towel.
You don’t need to rinse since the tea tree oil will destroy the mold and prevent it from returning if left on the surface.
on painted and wallpapered walls should be removed using this procedure. The mold removal home depot
will be able to offer a much more expert approach to your problem if the issue cannot be solved by simple home remedies.
Combine one cup of borax and one gallon of boiling water in a container. Place the lid on the container and shake vigorously to dissolve the borax. Fill a spray bottle halfway with the solution and apply it to the affected space.Services such as mold Toronto
may help if the damage has been difficult to handle and has spread deep.
With a brush, scrub the mold off the wall, then wipe it clean and let it dry. The solution does not need to be rinsed. If you have repaired the source of the mold problem, the borax will help keep it from returning.
Apart from borax, using products such asblack mold killer
may also help.
Baking Soda with Vinegar
Vinegar is a safe and efficient approach to destroy and prevent mold on porous and non-porous walls alike. White vinegar has been demonstrated to destroy 82% of mold spores according to studies. It is said to penetrate porous materials and destroy mold at its source.
Fill a spray container with white distilled vinegar without diluting it. Spray the vinegar on the wall and wait an hour for it to dry. Then, using a sponge and warm water, wipe the area clean.
It may be required to scrape the mold after washing the wall with vinegar. We suggest making a baking soda solution for this.
Mold may be killed with baking soda, which is a natural disinfectant. It also deodorizes and aids in the removal of mold’s musty, wet stench. Finally, it absorbs moisture, which helps to prevent mold growth.
To produce a baking soda solution, place one teaspoon of baking soda in a spray bottle with two cups of water and shake vigorously. To eradicate the mold, spray the affected area with the solution and scrub with a scouring pad or scrubbing brush.
After that, rinse the area with warm water to eradicate any remaining mold. Finally, re-spray the wall with the vinegar or baking soda solution to verify that all of the molds have been eliminated.
Grapefruit seeds extract
Another excellent natural mold killer is grapefruit seed extract. The grapefruit’s citric acid targets mold and destroys it naturally. It also has disinfecting and deodorizing properties.
In a spray bottle, combine 10 drops of grapefruit seed extract with one cup of water to make a solution. Shake the container well to properly mix the solution, then spray it on the affected region. Wipe away the mold and solution with a clean towel after a few minutes.
Bleach can be used to destroy mold on non-porous surfaces. It will not penetrate and destroy roots on porous surfaces. However, try some of the bleach solutions on some portions of the wall before you start
cleaning mold from the walls
. This assures that the texture of the wall will not be harmed.
To apply the solution to the wall, mix one-part bleach with three parts water. Allow 10 minutes before scrubbing the mold with a brush. Rinse thoroughly with clean water and pat dry with a clean towel.
How to prevent mold growth
Apart from opting for the help of
services, there are a couple of other steps that you can resort to as well. Opening your windows regularly to circulate fresh air is an easy technique to inhibit mold growth since mold favors a dark, damp atmosphere. If you can’t open your windows, it is suggested that you at least open your curtains throughout the day.
Often when the growth of the mold goes beyond the control of DIY remedies, it is suggested that you opt for professionalmold cleaning services.